PROJECTS

iTrader: (1)

Whats different about the ls1 and the ls1 t56? Will a ls1 t56 and the ls1 bellhousing mount to a SBC? And will BW, tremec, and richmond t56 internals swap??? thanks

ls1 joe

iTrader: (37)

Yes and no. The bellhousing is different and can be bought from Mcleod to fit the ls1 t56.

calhoon

iTrader: (6)

there are specific T56bells for the LS1 and LT1 models but more generic after market bells can adapt them for non-original use. The internals of T56 units ( BW and Tremec ) interchange somewhat, depending on the model.As far as I know there are no T56 parts that interchange with the Richmond.

jessmansweet

Another vote for (we need to make a sticky on this subject)

PROJECTS

iTrader: (1)

Are the LS1 27 spline and lt1 26?

Or do i need to try counting mine a 3rd time

calhoon

iTrader: (6)

What spline are you talking about?
Both have a 26T input and 27T output spline.( sounds like you should count at least a 3rd time)

PROJECTS

iTrader: (1)

input