Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Need instructions on Master Cyclinder and Slave Cylinder install?

Thread Tools
 
Search this Thread
 
Old 05-19-2006, 09:54 PM
  #1  
TECH Enthusiast
Thread Starter
iTrader: (100)
 
SSDoubleK's Avatar
 
Join Date: Aug 2005
Location: Greenville PA
Posts: 634
Likes: 0
Received 1 Like on 1 Post

Wink Need instructions on Master Cyclinder and Slave Cylinder install?

Need these instructions, detailed, never did this before, I have a 98 and purchased the slave and master for a 2001, this is supposed to be the upgrade for my car?
Old 05-20-2006, 03:36 PM
  #2  
TECH Fanatic
iTrader: (4)
 
SS4Matt's Avatar
 
Join Date: Apr 2005
Location: West Bloomfield MI
Posts: 1,010
Likes: 0
Received 1 Like on 1 Post
Default

Check www.installuniversity.com

go to LSx Vehicles, then install documents on the left.

go down to the Transmission section and there's a few different "install documents" that have 'em in there! hope that helps! i used their instructions when i did my clutch swap and they worked pretty well for me!
Old 05-22-2006, 07:06 PM
  #3  
Staging Lane
iTrader: (2)
 
BigJoeBob1's Avatar
 
Join Date: Mar 2006
Location: Lincoln, Ne
Posts: 80
Likes: 0
Received 0 Likes on 0 Posts
Default

Yep, head to install university or google trans am/camaro install guides. There is a lot of good information out there you just have to find it.




All times are GMT -5. The time now is 01:50 AM.