mcleod adjust master!! look inside--problem
06-10-2006, 10:42 PM
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Dec 2005
Location: Lake mary Fl
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
mcleod adjust master!! look inside--problem ok so i installed the new master and reconnected everything, but i cant get the system to keep pressure in it. there are no leaks and i dont know why the clutch wont become stiff and work! are their any ideas to what the problem is..!
all help is appreciated...as i need to get the car up, its my DD. thanks!
all help is appreciated...as i need to get the car up, its my DD. thanks!
06-11-2006, 02:45 PM
#3
The shop that originally installed mine never got it to hold pressure either. They took it out and bled it a couple of times. I took it to a service tech. I know at the Pontiac dealership and he fiddled with it and I never had another problem with it again. That was about 4 years ago.
06-11-2006, 10:57 PM
#5
wrencher
iTrader: (2)
Join Date: Aug 2002
Location: Chicagoland
Posts: 4,762
Likes: 0
Received 0 Likes
on
0 Posts
They can be hard to bleed sometimes. Other times just defective.
Some of them dont work for long I have seen. A rebuild w/a 13/16 wheel cylinder puck & your golden.
Search in here.
Some of them dont work for long I have seen. A rebuild w/a 13/16 wheel cylinder puck & your golden.
Search in here.