mcleod master rebuild
07-10-2006, 09:18 PM
#2
wrencher
iTrader: (2)
Join Date: Aug 2002
Location: Chicagoland
Posts: 4,762
Likes: 0
Received 0 Likes
on
0 Posts
Quite a few sponsors sell them if you call around to the ones that sell McLeod stuff & see if the stock one.
Otherwise you can just go to an auto parts store & get a 13/16" wheel cylinder puck.
That is the seal that wears out, & is all you need to replace. Only thing is it might be hard to find a parts store that still carries them.
Pick up a wheel cylinder hone to & use that to dress the bore as well on the rebuild.
Otherwise you can just go to an auto parts store & get a 13/16" wheel cylinder puck.
That is the seal that wears out, & is all you need to replace. Only thing is it might be hard to find a parts store that still carries them.
Pick up a wheel cylinder hone to & use that to dress the bore as well on the rebuild.