Need something better, quick.
#1
TECH Regular
Thread Starter
Join Date: Feb 2005
Location: Arlington TX
Posts: 481
Likes: 0
Received 0 Likes
on
0 Posts
Need something better, quick.
My stock clutch won't hold my 356 RWTQ worth a poop and I want my car running ASAP and I don't have much money. Any suggestions for a quick fix? Anybody have any luck just putting a better clutch plate and using the stock pressure plate?
#2
TECH Enthusiast
iTrader: (12)
Join Date: Sep 2004
Location: Danville, VA
Posts: 684
Likes: 0
Received 0 Likes
on
0 Posts
at very least, if you get a new clutch disc you will need to have the flywheel and pressure plate resurfaced. i'd replace it all, shop around and you can probably find a kit for pretty cheap.
#3
wrencher
iTrader: (2)
Join Date: Aug 2002
Location: Chicagoland
Posts: 4,762
Likes: 0
Received 0 Likes
on
0 Posts
The stock pressure plate usually is the problem.
Pulled many LS1 clutches where the disc was still usuable, but wouldnt hold new modded power.
It was the pressure plate that was at fault.
Just get a set & slave & be done w/ it.
Pulled many LS1 clutches where the disc was still usuable, but wouldnt hold new modded power.
It was the pressure plate that was at fault.
Just get a set & slave & be done w/ it.