LS7 Clutch: Love it, LS2 flywheel hate it...
#1
LS7 Clutch: Love it, LS2 flywheel hate it...
So, I got the LS7 clutch w/LS2 flywheel installed in the 2002 T/A. Overall, the setup holds very well. But I hate the enormous amount of mass it's added to the driveline, making the car feel like it's carrying an elephant in the back seat all the time.
Before the install, the car had a SPEC 3f, w/alum flywheel which made the car very responsive to throttle.
Two questions:
1) Will the Fidanza alum fw I see on E-bay for $300 and change, mate to the Ls1 crank properly?
(The link is: http://cgi.ebay.com/ebaymotors/FIDAN...spagenameZWDVW)
2) Are problems (chatter/slipping/etc.) likely if I only replace the flywheel and NOT the clutch & pressure plate? By the way, the whole setup has just been broken-in and only has 900 miles...
Before the install, the car had a SPEC 3f, w/alum flywheel which made the car very responsive to throttle.
Two questions:
1) Will the Fidanza alum fw I see on E-bay for $300 and change, mate to the Ls1 crank properly?
(The link is: http://cgi.ebay.com/ebaymotors/FIDAN...spagenameZWDVW)
2) Are problems (chatter/slipping/etc.) likely if I only replace the flywheel and NOT the clutch & pressure plate? By the way, the whole setup has just been broken-in and only has 900 miles...
#4
Kleeborp the Moderator™
iTrader: (11)
I don't know...I went from a Ram Powergrip with billet steel flywheel (which weighed in at 58 lbs with hardware) to an RPS Stage III (which weighed in at 37 lbs with hardware), and it made a night and day difference in responsiveness. Inertial loads are kinda funny like that (more like "funny, run over your dog ha ha").
#6
I ordered and paid for the Fidanza C6 LS2 Flywheel from Gripforce on Ebay on October 5th 2006 for my 99Z28. It is now Oct-22 and I have no flywheel and no tracking number.
On Oct-11 they claimed their flywheel shipment was delayed and it would take "a week or so" to come in.
I talked to them Thursday Oct-19 and they promised to send me a tracking number on Monday Oct-23rd.
At this point I don't believe them, especially when they continue to list the flywheel on E-bay, claiming to have 4 available.
Very frustrating because the car is still down. New LS7 clutch and new slave cylinder are waiting out in the garage......
Will find out Monday and let you know.
Brad
On Oct-11 they claimed their flywheel shipment was delayed and it would take "a week or so" to come in.
I talked to them Thursday Oct-19 and they promised to send me a tracking number on Monday Oct-23rd.
At this point I don't believe them, especially when they continue to list the flywheel on E-bay, claiming to have 4 available.
Very frustrating because the car is still down. New LS7 clutch and new slave cylinder are waiting out in the garage......
Will find out Monday and let you know.
Brad
Trending Topics
#8
Launching!
Join Date: Jul 2005
Location: Bay Area CA
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
I got mine from gripforce with no problems. i late a feeling that they are getting a lot of orders now. an aluminum flywheel will offset the added weight of the clutch and bring you down to stock weight. for the other guy running the alum fw, what shim did you use? im using a spec shim and an having separation issues.