robster

i put a stage 2 centerforce clutch in my 02 ss and its very rough going into gear, if it goes in. Once it goes into gear, with the clutch push all the way down, it start moving. Any suggestions?

jman0322

iTrader: (6)

Did you replace the slave and master? That's what I had to do to fix mine (I had the same problem).

robster

i did replace both. I think i may have air in the line. I just remembered that was my problem last time. I tried bleeding it from the slave cylinder and no air came out, both after that i used a power bleeder and got tons of air out.