Cant get car into reverse
#1
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Jul 2005
Location: Chitown-Jax NC-Jax FL-Honolulu-OKC, OK-NOW New Orleans Area
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
Cant get car into reverse
I replaced everything on the car about 2500 miles ago. Now I can not get it into reverse like it should. It took like 20min to get into reverse earlier today. The only other gear that is a pain in the butt is 1st. The reverse lights come on but gear does not engage. I am thinking of bleeding it again in case there is an air bubble in it. Dont really know what else to do minus pulling the tranny and replacing the throw out bearing which was new too. I have the Textrilla OZ700. So help???
#2
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Jul 2005
Location: Chitown-Jax NC-Jax FL-Honolulu-OKC, OK-NOW New Orleans Area
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
I checked the fluid in the res. and added a little and it works again.. Its a pain to get into reverse but it now works.
#3
On The Tree
iTrader: (8)
Join Date: May 2005
Location: Harlingen,TX
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1fastTransAm
I checked the fluid in the res. and added a little and it works again.. Its a pain to get into reverse but it now works.
Last edited by Figz Z28; 01-14-2007 at 02:02 PM.