6 speed conversion?
02-04-2007, 04:33 PM
#2
TECH Resident
iTrader: (21)
Join Date: Sep 2005
Location: New Jersey
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
no you don't need one, it will make the swap cleaner though. If you go through the sticky in the manual forums it tells you what wires you need to splice for the manual to function as advertised with the A4 harness
02-06-2007, 01:43 PM
#4
Restricted User
iTrader: (43)
Join Date: Nov 2001
Location: Pittsburgh, PA
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
If you have a M6 harness what will you still need to splice??? I read that sticky and got confused, seemed like it was all towards using an A4 harness..
02-06-2007, 01:49 PM
#5
TECH Resident
iTrader: (21)
Join Date: Sep 2005
Location: New Jersey
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
you should only have to splice the wiring on the inside, I think all there is is the clutch safety switch and the cruise cut off switch that goes on the clutch. I haven't seen the M6 harness though, i'm sure someone else could tell ya. With the A4 harness you have to do all that, plus every pigtail for the transmission. granted the VSS just needs to be lengthened, but you still have the reverse lockout, cags, reverse light switch and I think there's one I'm missin?