jimmypop13

iTrader: (17)

I just received my Pro5.0 shifter & a classic white gearshift outline shiftball from speed inc and I cannot get the shiftball screwed on. It will start threading but it's so unbelievably tight and it will maybe go down three threads and just stop. Is something just wrong with their shiftball or what is going on here?
-chris

wrencher

iTrader: (2)

Maybe some poorly cut threads?
I have had to use a 'strap' wrench to install & remove them from some cars, but rarely.

Phynix

iTrader: (3)

I have the same set up and it fit together just fine, look at the threads on the shift handle, it those are fine its gotta be the shiftballs threads

jimmypop13

iTrader: (17)

yeah it's gotta be the shiftball because the threads on the shifter are perfect