somethin is wrong but I don't know what.
#1
On The Tree
Thread Starter
iTrader: (12)
Join Date: Feb 2005
Location: Oklahoma City
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
somethin is wrong but I don't know what.
Last august I replaced all my hydrolics and installed a spec 2+......my car made 380hp and 370tq. I raced it for a while and wore the clutch out. I replaced the spec 2+ with a spec stage 1 twin disc. I had that in the car for 4 months and 10 passes. I added heads and made 450hp and 390tq...I ran 5 more passes and the clutch wore out.....I contacted spec and upgraded to a stage 3+ twin disc.....I put that in the car broke it in and went to the track....the car would not powershift 1st to 2nd....or 2nd to 3rd.....any ideas why?
#2
11 Second Club
iTrader: (36)
Join Date: May 2005
Location: South Jerzy
Posts: 1,449
Likes: 0
Received 0 Likes
on
0 Posts
yeah because specs are pieces of **** i went thro 4 of them, one made it to 13k miles, the other 3 all spec 3s went defective after 5kmiles, the springs kept popping out of the clutch plates. it was nice when they worked but reliability blows. get a ram powergrip HD at the very least