Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

t56 GT &WS6

Thread Tools
 
Search this Thread
 
Old 08-30-2007, 04:30 PM
  #1  
On The Tree
Thread Starter
 
Blk00TransAm's Avatar
 
Join Date: May 2004
Location: Pontiac,IL
Posts: 101
Likes: 0
Received 0 Likes on 0 Posts
Default t56 GT &WS6

Is it true that the 2000 mustang GT and 2000 Trans am are running the same trans? If so are they interchangeable ? can you take it out of the trans am and put it into the gt. the reason im asking is my friend needs a trans for his gt and i have an extra for the ws6. what would it take to do this ?
Old 08-30-2007, 04:44 PM
  #2  
TECH Fanatic
iTrader: (1)
 
michaelg589's Avatar
 
Join Date: Apr 2006
Location: Absecon, NJ
Posts: 1,685
Likes: 0
Received 0 Likes on 0 Posts

Default

GTs are 5-speed. TAs are 6-speed. Not the same trans in any way shape or form. 03-04 cobras have t-56s (not sure about the earlier years) and they would need a new bell housing or some sort of adapter to interchange.
Old 08-30-2007, 05:17 PM
  #3  
TECH Resident
iTrader: (4)
 
styoung's Avatar
 
Join Date: Jan 2007
Location: Mass
Posts: 753
Likes: 0
Received 0 Likes on 0 Posts
Default

the input shafts are different also.
Old 08-30-2007, 07:48 PM
  #4  
TECH Fanatic
iTrader: (1)
 
michaelg589's Avatar
 
Join Date: Apr 2006
Location: Absecon, NJ
Posts: 1,685
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by styoung
the input shafts are different also.
I thought so, wasnt sure.
Old 08-31-2007, 10:12 AM
  #5  
TECH Fanatic
iTrader: (5)
 
Black02SLPSS's Avatar
 
Join Date: Nov 2006
Location: Owasso, Ok
Posts: 1,484
Likes: 0
Received 1 Like on 1 Post

Default

00 Cobra R 03-04 Cobra and the 07 Shelby are the only stangs using the T56
Old 09-23-2007, 09:44 AM
  #6  
Banned
iTrader: (60)
 
thesource's Avatar
 
Join Date: Mar 2005
Location: Adkins - Tx
Posts: 2,693
Likes: 0
Received 0 Likes on 0 Posts
Default

A 2000 Gt uses a T45 also made by Tremec . Its a piece of junk . Ford started using the T3650 in mid 2001 and still uses it in all the Gt model cars . The T56 only came in the 2000 Mustang Cobra R , the 03/04 Cobra Terminator and the 07/08 GT500 . All the Ford units have a different spline inputshaft , front plate , bellhousing , clutch design and rear exntension housings . They do not easily interchange with any GM model that I am aware of . Ford / Tremec also offers an aftermarket T56 for the use behind the SBF based engines as well . It too has a similiar setup like the OEM Ford units .




All times are GMT -5. The time now is 09:57 AM.