**Shifter Vibration Problem....PLEASE help** - LS1TECH



Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters
Sponsored by:
Sponsored by:

**Shifter Vibration Problem....PLEASE help**

Reply
 
Thread Tools Search this Thread
Old 10-08-2007, 03:27 AM   #1
TECH Fanatic
Thread Starter
iTrader: (16)
 
my01ws6's Avatar
 
Join Date: Aug 2006
Location: Missouri
Posts: 1,055
Default **Shifter Vibration Problem....PLEASE help**

Ok so I have a problem with my shifter....when its in gear it vibrates REALLY bad...the faster I go the faster it rattles. Anyone know what might cause this?

Thanks

Ryan~
my01ws6 is offline   Reply With Quote
Old 10-08-2007, 09:45 AM   #2
Launching!
 
Join Date: Mar 2007
Posts: 207
Default

Its pretty common. My '99 does it with both the stock Hurst and the Pro 5.0 I just put in.
renxwar is offline   Reply With Quote
Old 10-08-2007, 01:53 PM   #3
TECH Fanatic
iTrader: (8)
 
sdm1234's Avatar
 
Join Date: Oct 2005
Location: Holland Twp/Milford, New Jersey
Posts: 1,421
Default

does it actually physically vibrate? or do you just hear the rattling resonating throughout the assembly? if it's vibrating, that's bad. it could be a loose transmission mount of possible engine mount. if it's just making a rattling noise, then you're fine. that's natural.
sdm1234 is offline   Reply With Quote
Old 10-08-2007, 02:28 PM   #4
TECH Fanatic
Thread Starter
iTrader: (16)
 
my01ws6's Avatar
 
Join Date: Aug 2006
Location: Missouri
Posts: 1,055
Default

No it physically vibrates...no just noise you can feel it...its so bad i hold onto it cause i think its gonna pop out of gear
my01ws6 is offline   Reply With Quote
Old 10-09-2007, 03:23 PM   #5
TECH Fanatic
Thread Starter
iTrader: (16)
 
my01ws6's Avatar
 
Join Date: Aug 2006
Location: Missouri
Posts: 1,055
Default

anyone?
my01ws6 is offline   Reply With Quote
Old 10-09-2007, 05:18 PM   #6
TECH Fanatic
iTrader: (12)
 
TheLS1Kid's Avatar
 
Join Date: Oct 2006
Location: Orlando, FL
Posts: 1,724
Default

I'd say transmission mount.
TheLS1Kid is offline   Reply With Quote
Old 10-09-2007, 05:47 PM   #7
TECH Enthusiast
iTrader: (2)
 
Join Date: Apr 2003
Location: CA
Posts: 661
Default

i have the same thing happening to my car. the stock hurst is worn out. plus when i added my es poly tranny mount the rattle quieted down quite a bit.
CaliboyTA is offline   Reply With Quote
Old 10-15-2007, 05:37 PM   #8
TECH Fanatic
iTrader: (8)
 
tee-boy's Avatar
 
Join Date: Apr 2007
Posts: 1,168
Default ddd

mine did that, it was the two loose bolts that hold the stick to the actual shifter. Tightened up w/ locktite and no problem
tee-boy is offline   Reply With Quote
Old 10-21-2007, 03:11 AM   #9
TECH Fanatic
Thread Starter
iTrader: (16)
 
my01ws6's Avatar
 
Join Date: Aug 2006
Location: Missouri
Posts: 1,055
Default

Well I got it up on a lift and took a pry bar and it seems I can pick up the tranny about an 1" off the mount....is this normal?

Could a bad clutch make this vibration? The shifter bolts are all tight and all the u-joints look ok. Man I tell ya guys this is VERY VERY annoying.

Also Ive noticed that now when I shift into gears there is a metal noise like the shifter is rubbing on something. I dono.
my01ws6 is offline   Reply With Quote
Reply


Tags
2001, 2006, 95, camaro, gto, shaking, shifter, ss, t56, trans, vibration

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 12:39 PM.