Mcleod 600 series- quick Q
10-24-2007, 07:56 PM
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Posts: 1,572
Likes: 0
Received 0 Likes
on
0 Posts
Mcleod 600 series- quick Q ok so im looking at the mcleoud (mcleod?) 600 series clutch. To complete the install which pressure pleat do i buy from them? Does it incluide the throw out bearing? The person there i talked to didnt really seem like he knew anything so i figured id ask here. Is the 600 the right cluctch for the job? A now stock lt1 in my 96 WS6, that will have twin turbos in the future? I want about 500-550 hp so i figure this clucth is good enough. HELP PLEASE!!!!!! lol this is my first six speed that ive tinkered with, havnt exactly cracked open the zo6 yet. Thanks in advance!!!
OH YEA- it had a ZOOM clucth stage 2 which after 300 miles failed miserably and in the process took out my pressure plate, flywheel, throw out bearing, fork, and starter. Weird enough. So from Jegs im getting a $600 credit do nothing too far over that. Thanks again guys!
OH YEA- it had a ZOOM clucth stage 2 which after 300 miles failed miserably and in the process took out my pressure plate, flywheel, throw out bearing, fork, and starter. Weird enough. So from Jegs im getting a $600 credit do nothing too far over that. Thanks again guys!
