elc339

Being this is my first clutch install/setup I wanted to get some feedback on the wear. All components were bought new and have 1500 hard street miles on them and 3 track runs with street tires. The one sided hot spots on the flywheel and pressure plate are my main concern. It does not look to be wearing correctly.

Anyway, any feedback would be great.

Oh ya, Geocities picture hosting sucks!


Disk1 - fly


Disk1 - Trans


Disk2 - Fly


Disk2 -Trans


Flywheel


Flywheel Close-up of Wear marks


Friction Plate - Fly


Friction Plate - Trans


Pressure Plate