Help please, Master or Slave?
#1
Staging Lane
Thread Starter
Join Date: Jan 2004
Location: Elmira, NY
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Help please, Master or Slave?
Driving normal, shift to second, no pressure in the clutch, Car still works, but the Mcleod is slipping bad!
Bought a new disc, and a slave, pressure plate resurfaced.
Car still engages all the way to the top of my release after new parts installed. I have a Mcleod Adjustable, did my master take a dump? The clutch just doesnt feel right, pressure is gone. I thought it was the slave, had all this stuff replaced and still not feeling right??
Bought a new disc, and a slave, pressure plate resurfaced.
Car still engages all the way to the top of my release after new parts installed. I have a Mcleod Adjustable, did my master take a dump? The clutch just doesnt feel right, pressure is gone. I thought it was the slave, had all this stuff replaced and still not feeling right??
#5
Staging Lane
Thread Starter
Join Date: Jan 2004
Location: Elmira, NY
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Havent messed with the master yet, crappy weather. My question is everything was working perfect then one shift and WHAM, clutch dis-engages all the way at the top, change all the parts and it still does it. It feels like there is no pressure in it at all. I am wondering if the pressure plate is bad. It looked fine when the shop had it out, no bent fingers and no hot spots on the PP.
#6
wrencher
iTrader: (2)
Join Date: Aug 2002
Location: Chicagoland
Posts: 4,762
Likes: 0
Received 0 Likes
on
0 Posts
Havent messed with the master yet, crappy weather. My question is everything was working perfect then one shift and WHAM, clutch dis-engages all the way at the top, change all the parts and it still does it. It feels like there is no pressure in it at all. I am wondering if the pressure plate is bad. It looked fine when the shop had it out, no bent fingers and no hot spots on the PP.