How much work to change 3-4 fork and blocker rings?
#1
How much work to change 3-4 fork and blocker rings?
How much work to change 3-4 fork and blocker rings, synchros, fork pads and whatever else needs to be upgraded to keep it from popping out of third.
Mainly wondering what special tools are needed and how many bearings need to be pulled.
I've rebuilt a few T5's and T45's without much trouble. Is a T56 much more difficult?
Mainly wondering what special tools are needed and how many bearings need to be pulled.
I've rebuilt a few T5's and T45's without much trouble. Is a T56 much more difficult?
#2
wrencher
iTrader: (2)
Join Date: Aug 2002
Location: Chicagoland
Posts: 4,762
Likes: 0
Received 0 Likes
on
0 Posts
IMO an easy overhaul. download the service manual best part it's free!!!
http://www.ttcautomotive.com/English...ice_Manual.pdf
http://www.ttcautomotive.com/English...ice_Manual.pdf
#6
Launching!
iTrader: (4)
Join Date: Feb 2006
Location: South Central Wisconsin
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Me and a buddy rebuilt mine this past weekend and it was not too bad. We did not have the proper puller to get stuff apart but made a defferent one work.
Basically its pretty strait forward and you just have to pay attention to what your doing. Take pictures if it will help you, and have a large CLEAN area to lay parts out on.
Oh yea, get the service manual, it helps alot.
Basically its pretty strait forward and you just have to pay attention to what your doing. Take pictures if it will help you, and have a large CLEAN area to lay parts out on.
Oh yea, get the service manual, it helps alot.