89Formulaws6

iTrader: (52)

i installed my ram adj cutch master when i put my new clutch and trans in and now i cant get the retaining clip by the clutch pedal that holds the rod in place to go on, idk if i should shave down some of the bearing part or what, it came with a zip tie but i dont see it holding that.

_JB_

iTrader: (33)

I had to grind it down. The zip tie is for the line going to the reservoir I believe.

blue98Z

iTrader: (29)

^^^You are correct on the zip tie and to the OP, you'll have to grind the eyelet down so that the clip will fit.

89Formulaws6

iTrader: (52)

thanks guys i thought i somehow installed it wrong lol