Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

t56 interchangable clutches?

Thread Tools
 
Search this Thread
 
Old 06-26-2008, 09:06 PM
  #1  
Teching In
Thread Starter
iTrader: (1)
 
89txiroc's Avatar
 
Join Date: Jan 2008
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Default t56 interchangable clutches?

Hey guys, I was driving my 89 TPI Camaro around town a few nights ago when I spotted this riced out 300zx... well I was playing with him and kept jerking on and off the gas to embarrass this guy while he was at full throttle.... I continue on with my business when this was done... car running fine.... then I clutch to downshift (traffic) and my pedal goes loose and I hear a bang from my tranny.

Well... Slave cyl is gone... and somehow I ripped my clutch into pieces... so its time for a new clutch... I have the old clutch disc from my t5 which is 10.25" rather than 11" Will this work for now? or will I just mess stuff up. the t5 clutch has taken me into 1.7 60' with NO slipping.
Old 06-26-2008, 10:44 PM
  #2  
9 Second Club
iTrader: (16)
 
scidav87's Avatar
 
Join Date: Apr 2008
Location: Kansas City, MO
Posts: 372
Likes: 0
Received 1 Like on 1 Post
Default

as long as the splines are the same size..i don't see why it would be a prob?




All times are GMT -5. The time now is 03:08 PM.