Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Textralia OZ700 Z grip on slicks with high dumps!?!?

Thread Tools
 
Search this Thread
 
Old 07-17-2008, 06:09 PM
  #1  
12 Second Club
Thread Starter
iTrader: (59)
 
kkslds's Avatar
 
Join Date: Mar 2007
Location: Coffeyville, Ks
Posts: 916
Received 1 Like on 1 Post

Default Textralia OZ700 Z grip on slicks with high dumps!?!?

I have a h/c/i car making 435rwhp and am planning on spraying it in the near future. So far I actually only have 3 track passes on my textralia oz700 and its awesome, but i'm getting ready to install my 9" with 4.30's and will be running 28x10x15 hoosier drag slicks. I plan on dumping it pretty high and was wondering if I should go ahead and step it up to a twin disk or will my single disk be ok? I'm asking because I would like to sell the clutch in my car now while its still like new if its gonna give in on me with the high dumps.
Also I have a mcleoud master with drill mod and new slave. My trans is a lv.1 six speeds inc.
Old 07-18-2008, 05:25 AM
  #2  
TECH Fanatic
iTrader: (21)
 
coolformula's Avatar
 
Join Date: Feb 2006
Location: Greater Chattanooga
Posts: 1,029
Likes: 0
Received 0 Likes on 0 Posts

Default

Should fine without the spray..depends on how much and how much abuse will i thold then.....most people have pretty good luck.
Old 07-18-2008, 07:46 AM
  #3  
TECH Fanatic
iTrader: (9)
 
SPEEDYws6's Avatar
 
Join Date: May 2005
Location: Longview, TX
Posts: 1,085
Likes: 0
Received 0 Likes on 0 Posts

Default

I have gone 10.2 @ 132 with my oz700. So far so good.
Old 07-18-2008, 01:58 PM
  #4  
11 Second Club
iTrader: (3)
 
dmart's Avatar
 
Join Date: Dec 2005
Location: St Paul, MN
Posts: 281
Likes: 0
Received 0 Likes on 0 Posts
Default

I bet if you make 600 or less it'll be ok for a while...Though I have no basis for this statement
Old 07-18-2008, 03:36 PM
  #5  
12 Second Club
Thread Starter
iTrader: (59)
 
kkslds's Avatar
 
Join Date: Mar 2007
Location: Coffeyville, Ks
Posts: 916
Received 1 Like on 1 Post

Default

I make 435 rwhp and am planning on spraying a 100 dry shot. I just wanted to make sure I wasnt gonna go toast a new clutch when if I would have just asked I would have known it was gonna happen
Old 07-18-2008, 05:44 PM
  #6  
10 Second Club
iTrader: (22)
 
02NBMWS6's Avatar
 
Join Date: Mar 2006
Posts: 1,366
Likes: 0
Received 1 Like on 1 Post
Default

that clutch is the ****. Ive dumped it with 600rwhp on 28 Et Drags to a 1.47 60 ft over and over. It's awesome




All times are GMT -5. The time now is 08:17 PM.