HavATampa

iTrader: (49)

Has anyone tired reverse engineering this kit that Speedway Motors sells to replace the crappy hydraulics in our cars? It's meant for non F-Body projects that are using the T56 transmission and it's release bearing with quick release fittings. They sell a seperate line kit with several sizes of the braided hose, and fittings to fit the hose on a 7/8" bore Wildwood replacement master cylinder.

http://www.speedwaymotors.com/p/9086...tch-Lines.html

http://www.speedwaymotors.com/p/1133...Cylinders.html

Jonathan@Tick

iTrader: (5)

The master bolts into the firewall on an f-body at a very odd angle. The flange that bolts it in is also located in the middle of the body, not on the end like the wilwood cylinder.