OWENMUSTANG

iTrader: (2)

my ls1 is furbared...

(oh, except livernois)

thanks!

Detroitmuscle

iTrader: (16)

Wheel 2 Wheel is probably the best around of course you'll pay for what you get though.

1BADAIR

iTrader: (1)

whats wrong. I've been doing some side work since I lost my job.

OWENMUSTANG

iTrader: (2)

CAM, INTAKE, HEADS, CHIP.

i put 5.3's and a 220@.050 cam + a lsx90mmtb on my camaro.
now the car won't idle. (yet to take it out of the driveway) check engine lights on (everything was supposed to be turned off with the ecm)

OWENMUSTANG@AOL.COM

Detroitmuscle

iTrader: (16)

Do you know what they had yur idle set at? Did you drill a hole in the TB? Will it idle if you give it 15% throttle and keep it there?

1BADAIR

iTrader: (1)

what 90 TB..I have seen some cause issues. If it will idle with the throttle open then open the TB blade a little with the idle screw. Also, some new porgrams need to relaern the idle and iac counts so it may take a little while

OWENMUSTANG

iTrader: (2)

fast90. car basicaly ran like **** wasn't happy anywhere when trying to hold it at X rpm.. be honest, i haven't even tried to start it in a year. messed with it for 2 months last spring.. now, just got to get this fixed so i can minimize my massive loss on this p.o.s.

OWENMUSTANG

iTrader: (2)

oh, if i can find time, i'm going to take the fast intake off and retry the stock 98 intake...

1BADAIR

iTrader: (1)

Do you know what codes it has. Does the check engine light flash?

what push rods does it have.
did the injectors get changed?

CLOKWRK

iTrader: (9)

If you want to try my nice painted black LS6 intake and ported TB, I'll try out your FAST 90/90

I know my car is running/idling good! If both our cars end up running good I'll trade ya + cash too!!

1BADAIR

iTrader: (1)

haha my 382 really needs a 90mm