SPRAYED 01

iTrader: (22)

I have a small crack developing on my turbo manifold that i want to tig up before in starts to leak. Its in an easy spot on the top of the manifold and im pretty sure can be fixed with out taking it off the car. Is there anyone around Chicago that i could drive my car to when its nice out and have that welded up? Shoot me a pm and a price.

Alex

qqwqeqwrqwqtq

FWIW it may be possible to weld in the car but to do it properly the ends of the crack need to be drilled.

SPRAYED 01

iTrader: (22)

The drilling of the ends wont be a problem, the part that is cracking is right on top and very easy to get to with the fuel lines and the coil pack off on the driver side. I know how to weld just dont have a welder.
Thanks for the heads up.

b00sted

iTrader: (7)

Call Freddie at (708)439-8149. He's right off of I-80 and Harlem and does this for a living.

He does some awesome fabrication...

SPRAYED 01

iTrader: (22)

Cool thanks.

SilverGhost

iTrader: (53)

best tig welder I know just posted in this thread, sup Jimbo.

Jim you still have the same cell number? I need to call you to see if you can weld up a spot on my snowmobile in the aluminum..

qqwqeqwrqwqtq

Sean, same #. You need something welded just bring it by.

SilverGhost

iTrader: (53)

ok i'll call you bro.

shouldn't be a big deal, can do it with the part on the sled, i'll bring it by on the trailer. just a 1/4" hole in a tube in the heat exchanger on the back, had a little incident with a nasty wheelie last weekend and dragged the back end on the ground kinda hard

qqwqeqwrqwqtq

As long as I can get to it and it can be cleaned 100% it shouldn't be a problem.

SilverGhost

iTrader: (53)

oh yah, its extremely accessible, nothing will be in the way at all. i'll remove the gas tank repair putty i put on it. its not leaking while it runs on the trailer but i don't trust that **** permanently. we like to cross open water out on the chain/fox river and last thing i need is it popping loose half way through a 400 foot water hole

quadd2244

iTrader: (13)

Hey man I see that project in your sig. Did you ditch that Typhoon project and decide to do the Z06? Eitherway they will both be amazing

Goodluck man

SPRAYED 01

iTrader: (22)

Good bye thread.

SilverGhost

iTrader: (53)

more posts equals it'll get more attention, if it weren't for us highjackers there would be one response

besides..already told you, take it to Jim, nobody better.

y2k_ta

iTrader: (80)

It's not that we're taking it off track.....we're just really friendly

SPRAYED 01

iTrader: (22)

Thats cool, highjack away. Think i found a guy at work that can do it.

SilverGhost

iTrader: (53)

well on a sidenote i won't be needing my **** welded on my sled. spent more time on it today and i think the tunnel is really tweaked..gonna drop the sled off at route 12 arctic cat tomorrow and call state farm.