modified ZL1 camaro on the dyno/drag strip *video
05-09-2012, 03:23 PM
#1
Teching In
Thread Starter
Join Date: Jun 2007
Location: houston, TX.
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
05-11-2012, 08:35 AM
#8
Teching In
Thread Starter
Join Date: Jun 2007
Location: houston, TX.
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
this was the owners first time at the track after the mods were installed and he was having a tough time to say the least. those were street tires he was on, with more practice and a decent set of DRs or slicks, this car should easily shave a few digits off of that ET and cross the line way faster.
05-12-2012, 09:05 AM
#10
TECH Regular
iTrader: (1)
Join Date: Dec 2005
Location: Cape Cod, MA
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Not bad considering they were tested at 12.0 give or take a tenth by pro drivers stock. So a couple pullies, 160 stat, dyno tune, and isolater for a 11.4. Easy enough, what do you think headers, and maybe other simple things would net?
05-26-2012, 05:02 PM
#12
Teching In
Thread Starter
Join Date: Jun 2007
Location: houston, TX.
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Ben was using various settings in an attempt to figure out how to get the ET down. It was basically, 'drag racing 101' for him that day, lol.
he's not sure what the setting was for that time, he was hot lapping the hell out of it that day and trying different settings/techniques each time.
he's not sure what the setting was for that time, he was hot lapping the hell out of it that day and trying different settings/techniques each time.
