Jakson

iTrader: (50)

I dyno'd my "5.3" the other day.
332 cube, 6.0 block, 4.8 crank, LS3 heads, 9.5:1, E85, 239/243 116+4 cam, PT8847 turbo, front mount C6/truck mani kit by One-Guys-Garage built to fit with AC and stock rad. Check the build thread in my sig for more pics.

1,092HP and 755TQ at 7600 RPM with 20psi. Engine was still climbing, just ran out of dyno time to pull it farther. Hopefully turn it 8,000 once it's in the car, and put down 4 digits to the wheels through the T56.

http://youtu.be/so20on3hlJE

chadroosa

iTrader: (14)

one bad mamma jamma

bowtieguy72

iTrader: (9)

sweet!!

A.R. Shale Targa

iTrader: (2)

Wayyyy COOL !!!! Ol' Myron Cotrell still makin' stupid power

Jakson

iTrader: (50)

This combo was all thought up, engine machined an built by myself. Nate at OGG did the turbo kit fabrication. Myron was still around to watch though.

V-seriesTech

iTrader: (5)

7600 rpm hot dayum. SHould be a BLAST with a six speed @ 8k

NIce power.

posenheimer

Any updates on this bad boy??

Jakson

iTrader: (50)

Not really, unfortunately. Been far too busy with other things lately, the project was kind of put on hold over winter. The car has to be done by July for various events though, so you can count on that. I have the car out of storage, and a pile of parts sitting here. I'm ready to start working on it, nothing to it but to do it now! Acquired this new intake, should be good for a little more HP and RPM.

madmike9396

iTrader: (29)

That's bad ***

89gmcs15

iTrader: (7)

Stock block, heads, and crank?

Jakson

iTrader: (50)

Yep, stock 6.0 block, 4.8 crank, and LS3 heads. I used Callies rods, Diamond pistons, and ARP studs. You can check the link in my sig for some more pics of the build.

SSmoken

iTrader: (26)

look at that little guy. would never guess it was capable of those numbers lol. VERY NICE!