Cam idle video
03-15-2015, 06:17 PM
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Jul 2007
Location: Leander, TX
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Cam idle video Car is a 2000 with full exhaust m6 and stock heads. Has a Sns stage 3 cam from tick performance. Car is untuned so still waiting on final numbers
Last edited by Havok956; 03-20-2015 at 04:37 PM. Reason: Video embed
03-21-2015, 06:56 AM
#5
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Jul 2007
Location: Leander, TX
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
I bought the Brian tooley springs Martin recommended. I really like the idle and it sounds wicked with the cutout open 😈 hoping to get it tuned this coming up week. I'll post the numbers once I get them.
03-24-2015, 09:59 PM
#6
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Jul 2007
Location: Leander, TX
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Well I'm not too sure what to think about the final numbers but it put down 360 rwhp. Didn't get a torque reading cause something was broken on the dyno from what I was told.
They said their dyno reads lower than others and that my car was running fine and not to worry about the dyno numbers
They said their dyno reads lower than others and that my car was running fine and not to worry about the dyno numbers
03-26-2015, 12:54 PM
#7
This cam has proven itself to be a very strong performer in many other combinations, I wouldn't worry about numbers too much unless the car doesn't trap the MPH it should at the track.
Then you may need to look at the tune or elsewhere to see if there is a restriction.
Then you may need to look at the tune or elsewhere to see if there is a restriction.