Black98Z28

iTrader: (8)

this is my friends 99 T/A..has a Futral F13 cam..Long Tube headers..y-pipe..3" cutout...3800 Torque converter...car is simply amazing...

http://videos.streetfire.net/Player....B-14156D5BBEBA

SebastianLopezJr

iTrader: (4)

Nice!

ynkssws6

iTrader: (1)

what kind of heads does he have on there? Car sounds so bad ***

Ego Killer

iTrader: (147)

what kind of ET's does it run.Im looking into that very cam,and how is its street mannors?

Black98Z28

iTrader: (8)

well at a elevation of 5320 feet above sea level and a DA usually about 3 (about 7000feet total) the car ran a 13.1 and was absoluty everywhere...couldnt hook..and also it has no free mods done yet so hes leaving about 30-35 horses on the table...also when he ran the car it was untuned which was cutting his power in the upper RPM's and he also had the stock LS1 intake now he has the LS6 intake and is tuned!...but he is on the process of getting some nice DR's and the car will run 12's...as far as being steet driven its got a 3800 stall and the car drives like stock! i was surprised when he took me for a ride..the only time u notice it has a cam is at idle or when the rpm's go down under around 1000rpm it sorta bucks just a little bit but either than that its a all around cam...and as heads go its got the stock heads he will be in the market for some AFR 205's possibly by the end of summer or maybe fall...car is a monster with that cam we have picked on some vipers, few C6's, new 05 Stangs, cam is awesome..i am more than likely gona go with this cam aswell.

'99pewtert/aff

Well Chris(black98z28) is almost dead on with his description. I still need an underdrive pully and ported TB, also I have done no free mods. The 13.11@105.68 was on a 1.856 60ft, that corrects to about a 12.2@113. That run was untuned and with the stock LS1 intake as mentioned above. I will be looking to run again after I get some DR's or slicks, cus street tires suck As far as how it drives, with the cut-out closed its like stock. There is alittle bucking around 40mph under 1300rpms, nothin major. Also my cam is a FMS F13 on a 110 LSA. God I love how it sounds especially at higher speeds/rpms (cut-out open). I would definatly recommend this cam its awsome. FMS=teh bomb. Looking to do some AFR 205's 66cc by August, then in the fall forged rods, crank, pistons and by next summer some type of FI. Thanx for the replies.
-Andre