Bolt-on WS6 vs "Bolt-on" 03 Cobra
08-04-2006, 06:34 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: West Virginia
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Bolt-on WS6 vs "Bolt-on" 03 Cobra sorry, 347fairless, you told me you were going to post it on all of my boards if you beat me, so it's only fair 
There's a long story behind the race, but basically I got called out for a little bit of money by 347fairless who has a couple bolt-ons on his ws6, plus 8.8 rear+4.10's (numbers and mods in his signature).
literally a bolt-on WS6 vs 2.76 pulley/ported blower/exhaust, both on drag radials
http://home.comcast.net/~svh19044/it...airlessdvr.wmv
Props to the fairless for following through with the race though, and my beer money for last night
There's a long story behind the race, but basically I got called out for a little bit of money by 347fairless who has a couple bolt-ons on his ws6, plus 8.8 rear+4.10's (numbers and mods in his signature).
literally a bolt-on WS6 vs 2.76 pulley/ported blower/exhaust, both on drag radials
http://home.comcast.net/~svh19044/it...airlessdvr.wmv
Props to the fairless for following through with the race though, and my beer money for last night
Last edited by ITSTOCK; 08-09-2006 at 05:13 PM.
08-04-2006, 07:31 PM
#5
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: West Virginia
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by OldSchoolFormula
What a pair of tools. Nice traffic going the other way, morons. Idiots like you sure cause a lot of problems for the rest of us.
....moron as to causing problems, I'm not sure what you are talking about, I'm listening
Now go wash the sand out of your vagina
Last edited by ITSTOCK; 08-04-2006 at 07:36 PM.
08-04-2006, 08:01 PM
#7
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: West Virginia
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02SOMWS6
Not to smart on the WS6's part. How bout a H&C WS6 vs. bolt on 03 cobra. I have beat my fair share of SVT's at E-town and LVD.
I really wasn't interested in even running him, let alone for money, untill he said it on one of the boards. I (the alcoholic that I am) obviously jumped on the beer money offer/opportunity of $100.
Trending Topics
08-04-2006, 08:11 PM
#9
Originally Posted by ITSTOCK
I only ran an 11.6@122 (on eagle F1's) with the UNported blower, so you would have beaten me too
I really wasn't interested in even running him, let alone for money, untill he said it on one of the boards. I (the alcoholic that I am) obviously jumped on the beer money offer/opportunity of $100.
I really wasn't interested in even running him, let alone for money, untill he said it on one of the boards. I (the alcoholic that I am) obviously jumped on the beer money offer/opportunity of $100.
08-04-2006, 10:27 PM
#11
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: West Virginia
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 02SOMWS6
I'm just talking junk, I don't drive my car much on the street. My sig is just for bait. The video is from 03. I have done a ton of stuff since then and added a 150 shot of NOS. I'm not a ford fan but I would love to get my hands on a 03/04 SVT cobra.
I have a 185 shot on my car, my older numbers were 663rwhp/803rwtq and I never made it down the track because I kept breaking halfshafts on the launch. I now have a ported blower so when I spray, it's over 670rwhp
08-04-2006, 10:29 PM
#12
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: West Virginia
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by yobabiesdaddy2001
you spanked his ***! You guys must be young, because where you raced was pretty dumb!!!!!
08-05-2006, 12:57 AM
#13
TECH Resident
Join Date: Sep 2004
Location: Clarksville, Tn
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
Where youraced wasnt a good idea, but that race was ok...For a 500hp Cobra, it didnt pull tohard on him...Figured you would have taken him by more than 2-3 lengths. I was thining more like a bus and a half......But nice kill.....
08-05-2006, 07:42 AM
#14
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: West Virginia
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 00TAProject
Where youraced wasnt a good idea, but that race was ok...For a 500hp Cobra, it didnt pull tohard on him...Figured you would have taken him by more than 2-3 lengths. I was thining more like a bus and a half......But nice kill.....
On the UNported blower I ran 11.6@122, vs his 12.5@110 if that gives any indication.
08-05-2006, 06:20 PM
#20
TECH Regular
Join Date: May 2005
Location: Bay Area, CA
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ITSTOCK
Yes, because cars are likely to just out of the blue, drive across 2 lanes in to uncoming traffic when there are no turns to be made ....moron
as to causing problems, I'm not sure what you are talking about, I'm listening
Now go wash the sand out of your vagina
....moron as to causing problems, I'm not sure what you are talking about, I'm listening
Now go wash the sand out of your vagina
Gee, and I guess parts don't brake and cars don't ever go flying into walls or the like at the track. Never seen a car go completely sideways down the track after losing traction on a shift or the like either. Nope, never happens. I wonder why they have retaining walls. Or ambulances. Street Racing is one thing, when done smart. What you guys did was absolutely foolish. Go find an empty road somewhere if your going to do that kind of ****.
Problems, have you not noticed the absolute crackdown nationwide (and its bad around here...) on performance cars because of street racing idiots like yourself?