NX 97 Cobra vs NX C 05 Silverado, Vortech 02 GT vs Procharged 01 GT, 350Z vs SRT4
10-08-2006, 09:11 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (28)
Join Date: Jan 2002
Location: Pensacola Florida
Posts: 581
Likes: 0
Received 0 Likes
on
0 Posts
NX 97 Cobra vs NX C 05 Silverado, Vortech 02 GT vs Procharged 01 GT, 350Z vs SRT4 Mods are in the videos.
Rematch from their 45 roll, this time from a 20 and the Silverado has a real cam instead of the Z06 cam, Silverado did around 420 rwhp converter unlocked, the Cobra hurt the clutch pretty bad in third, clutch is toast now. Silverado didnt wanna shift to third right away either.
http://media.putfile.com/97-Cobra-vs-05-Silverado-53
Some new guy in a Procharged 01 GT rolled up. He said it did around 380 rwhp and had 3.08's because he took his 3.73's out because he drove long distances.
The Vortech 02 GT is detuned to keep it safe but still put down 431 rwhp on 10 psi with only 14 degrees of timing in it. The Procharged car said he reved it up dumped the clutch and spun real bad? He must have been in first gear with the 3.08's. http://media.putfile.com/01-GT-SC-vs-02-GT-SC
jkstarr in the 350Z with his wife filming
vs an SRT4 that said he was stock expect for a cai and had 3 people in it. Ole 350Z was putting it to em! http://media.putfile.com/350Z-vs-SRT-4
jkstarr again with the Mrs. filming vs 02 Mustang GT. http://media.putfile.com/02-GT-vs-03-350Z
Rematch from their 45 roll, this time from a 20 and the Silverado has a real cam instead of the Z06 cam, Silverado did around 420 rwhp converter unlocked, the Cobra hurt the clutch pretty bad in third, clutch is toast now. Silverado didnt wanna shift to third right away either.
http://media.putfile.com/97-Cobra-vs-05-Silverado-53
Some new guy in a Procharged 01 GT rolled up. He said it did around 380 rwhp and had 3.08's because he took his 3.73's out because he drove long distances.
The Vortech 02 GT is detuned to keep it safe but still put down 431 rwhp on 10 psi with only 14 degrees of timing in it. The Procharged car said he reved it up dumped the clutch and spun real bad? He must have been in first gear with the 3.08's. http://media.putfile.com/01-GT-SC-vs-02-GT-SCjkstarr in the 350Z with his wife filming
vs an SRT4 that said he was stock expect for a cai and had 3 people in it. Ole 350Z was putting it to em! http://media.putfile.com/350Z-vs-SRT-4 jkstarr again with the Mrs. filming vs 02 Mustang GT. http://media.putfile.com/02-GT-vs-03-350Z
Last edited by Speeds8erM-1; 10-08-2006 at 10:21 PM.
10-08-2006, 10:19 PM
#3
Originally Posted by Speeds8erM-1
jkstarr in the 350Z with his wife filming
vs an SRT4 that said he was stock expect for a cai and had 3 people in it. Ole 350Z was putting it to em! http://media.putfile.com/350Z-vs-SRT-4 
10-08-2006, 11:51 PM
#5
TECH Enthusiast
Thread Starter
iTrader: (28)
Join Date: Jan 2002
Location: Pensacola Florida
Posts: 581
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jksstar
the SRT was only him and his girl. The twin (sorry bad with names ) got out of the car. So both cars were the same, driver plus 1
Trending Topics
10-10-2006, 05:44 PM
#9
TECH Fanatic
iTrader: (7)
Join Date: Dec 2004
Location: pensacola, fl.
Posts: 1,555
Likes: 0
Received 0 Likes
on
0 Posts
yes he did, back with the ls6 cam and the first pass started to one wheel wonder and hasnt stoped yet.(factory g80 crap). best he could muster with a very shytty 60ft and it spinnin one wheel down the track was a 9.5@77 on motor... no use sprayin it if it isnt hookin on motor.. he should have a new posi and new cam track times sometime soon..
10-10-2006, 09:20 PM
#11
Originally Posted by slimcracka
yes he did, back with the ls6 cam and the first pass started to one wheel wonder and hasnt stoped yet.(factory g80 crap). best he could muster with a very shytty 60ft and it spinnin one wheel down the track was a 9.5@77 on motor... no use sprayin it if it isnt hookin on motor.. he should have a new posi and new cam track times sometime soon..
It locks almost everytime on the street but not 1 time at the track, it was a 3 second 60 ft. as soon as i can afford to i will order a Eaton HD! 