"RAGE" getting a workout.....Northstar 09-05-08
#1
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: DFW
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
"RAGE" getting a workout.....Northstar 09-05-08
"RAGE" doing some exercises NOT 56K FRIENDLY!!!!!!!!
i actually have video of the PB......
HURRAH!!!!!
1.53 60'
7.04 @ 96.92
no 6 yet.....93 pump gas, 22 deg. of timing with a fat 150 shot (working to lean it) and full weight on drag wheel setup (4750ish).....
NEXT - get the AFR to 11.9-12.1 and 104+ octane to get 24 deg. from trap to trap....
LATER - 2 bottles mounted and y-ed with -6 from bottles all the way to the solenoid.....
EDIT: you tube link
http://www.youtube.com/v/wN31FCDKMhc&hl=en&fs=1
i actually have video of the PB......
HURRAH!!!!!
1.53 60'
7.04 @ 96.92
no 6 yet.....93 pump gas, 22 deg. of timing with a fat 150 shot (working to lean it) and full weight on drag wheel setup (4750ish).....
NEXT - get the AFR to 11.9-12.1 and 104+ octane to get 24 deg. from trap to trap....
LATER - 2 bottles mounted and y-ed with -6 from bottles all the way to the solenoid.....
EDIT: you tube link
http://www.youtube.com/v/wN31FCDKMhc&hl=en&fs=1
Last edited by TBSS-RAGE; 09-08-2008 at 09:22 AM.
#3
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: DFW
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
thanks brother finally getting the short times dialed in....
i cut 4 1.5X's
1.5872
1.5836
1.5384
1.5559
in that order before the idiots driving through the water box RUINED the prep....it was a very sticky track last night.....those bois at northstar are really putting some good preps together lately.....i think with some tweaks i can SQUEEZE a 1.4X out of it.......REALLY......
i cut 4 1.5X's
1.5872
1.5836
1.5384
1.5559
in that order before the idiots driving through the water box RUINED the prep....it was a very sticky track last night.....those bois at northstar are really putting some good preps together lately.....i think with some tweaks i can SQUEEZE a 1.4X out of it.......REALLY......
#4
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: DFW
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
you tube link
http://www.youtube.com/v/wN31FCDKMhc&hl=en&fs=1
SORRY guys for the wasted time on the interior and sapre tire area shot...........we have a large segment of the TBSS crowd that removes EVERYTHING not welded down before a track trip and then posts their time in -DA with a race weight nothing like it sits on the street and that part of the video was my in your face for those that strip their ride before posting PB's...........
this was a race weight of about 4700-4750, i have not weighed it with the drag rad and skinny fronts yet
enjoy, the you tube link is MUCHO faster to downlaod and play......enjoy......
http://www.youtube.com/v/wN31FCDKMhc&hl=en&fs=1
SORRY guys for the wasted time on the interior and sapre tire area shot...........we have a large segment of the TBSS crowd that removes EVERYTHING not welded down before a track trip and then posts their time in -DA with a race weight nothing like it sits on the street and that part of the video was my in your face for those that strip their ride before posting PB's...........
this was a race weight of about 4700-4750, i have not weighed it with the drag rad and skinny fronts yet
enjoy, the you tube link is MUCHO faster to downlaod and play......enjoy......
Trending Topics
#8
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: DFW
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
not a unique idea.....i copied it off this DETAIL FREAK on the TBSS board that hated his stuff getting dirty at the track
i said the same thing and went to home depot and bought a **** load of painters tape....it is just sticky enough to stay on but not so sticky it leaves GOO on the paint.....JUST A PERFECT way to deal with the mess......
Last edited by TBSS-RAGE; 09-09-2008 at 12:39 PM.