Security System Elimination???
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Ohio
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Security System Elimination???
I keep having problems with my 1998 SS.
Every so often when I try to start the car nothing happens.....I need to let it set and reset the Vats security system.
I would like to get rid of it........
Is here a way to completely eliminate or bypass the system?
I already did the key bypass with resisters but must be having problems other places in the security system.
Every so often when I try to start the car nothing happens.....I need to let it set and reset the Vats security system.
I would like to get rid of it........
Is here a way to completely eliminate or bypass the system?
I already did the key bypass with resisters but must be having problems other places in the security system.
#3
TECH Senior Member
Is the security light coming on? Shouldn't if VATS was bypassed correctly. PCM tune alone won't do it - the BCM enables the crank circuit to the starter and simultaneously sends a signal to the PCM fuel enable circuit. If the light isn't coming on something else is happening.
#4
Teching In
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Ohio
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Is the security light coming on? Shouldn't if VATS was bypassed correctly. PCM tune alone won't do it - the BCM enables the crank circuit to the starter and simultaneously sends a signal to the PCM fuel enable circuit. If the light isn't coming on something else is happening.
#5
LS1Tech Premium Sponsor
iTrader: (5)
You can hardwire around it, but honestly it's much easier to just have it tuned out!
__________________
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
#6
TECH Senior Member
You saying you can tune out VATS only in the PCM on a stock car and it will completely alleviate his issue? Not trying to argue, but the PCM doesn't read the key pelet value, the BCM does right?