Broken Pushrod
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Broken Pushrod
Hey I have a 2000 z28 and recently had a misfire on cylinder 2. So thanks to a buddy we took off the header cover and found out it had after market rocker arms but still had stock springs and pushrods. We found that the pushrod was bent and broken... However we have no clue why this happened. It has a stock cam and when we put a new push rod it worked normally. Any ideas of why it broke?
#4
I have the same problem with my 99Z. Did you pull the head or just replace the pushrod and throw it back together and hope for the best? I am thinking of pulling the head just because I am alread this far into it. really dont want to though.
Trending Topics
#8
LS1Tech Premium Sponsor
iTrader: (2)
That should do the trick!
__________________
NOW OFFERING TSP BY YANK CONVERTERS
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
NEW NUMBER (512)863-0900