Need some help here on cam/stall/gears opinions !!!
10-09-2013, 09:15 PM
#1
Teching In
Thread Starter
Join Date: May 2013
Location: Pilot Point ,Tx
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Need some help here on cam/stall/gears opinions !!! Ok so I got this GTO with all the mods already done to it ... LS1 with 240/246 cam and I went with a 3800 stall (not in car yet) and I'm thinkin I've still got the stock gears which are 3.46's ... I'm just wantin you guys personal opinion on this set up ... Let's not forget I'm a 2 ton car with me in it ... LOL crazy ...and oh yeah it's a custom grind cam from roadkill at aggressive motersports down in South Texas ... So the other numbers I got for the cam might not be right .... 240/246 XXX/XXX 109 LSA ... Got no low end tq at all without the stall ... Even bogs from dead stop unless I slowly let it clime to 2K ... It was tuned be KHP out of HOUSTON ... What I'm really askin is once the stalls in it and it's tuned should I change gears for more low in tq ??? THANKS
NOAH
NOAH
10-09-2013, 09:20 PM
#2
Teching In
Thread Starter
Join Date: May 2013
Location: Pilot Point ,Tx
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
It's my dd but i dont care about drivability ... YouTube ... GTO idle video RK cam @ KHP - YouTube
Last edited by NoahburchGTO; 10-09-2013 at 09:30 PM. Reason: Forgot YouTube part
10-21-2013, 02:13 PM
#4
Staging Lane
iTrader: (2)
Join Date: Feb 2011
Location: Lancaster, PA
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Yeah You want this under vehicle specific An eaton tru trac and 3.91s would be a healthy upgrade but it is all in the tune your MPG will suffer with those gears in.