installed a 99 lm7 and getting overheating issues
06-21-2015, 06:28 PM
#1
Registered User
Thread Starter
Join Date: Jun 2015
Location: fresno
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
installed a 99 lm7 and getting overheating issues I swapped a 99 lm7 into a wagoneer and I am now having overheating issues. I have a dual fan griffin radiator and both fans are jumpered together as Low temp fan. I am able to hold temp at idle but after a 4 min test at 2500rpm the temp can get up to 230. The temp will come back down after the test but why am I getting such high temp's to begin with? This build is a rock crawler and I will consistently be moving slow with high rpm's. Any help will be appreciated. Please see what I have done already:
Jumpered both fans together
I have burped it multiple times
changed thermostat
bled air out the steam cross over tubing
*have not changed head gasket due to my knowledge, no one has been that deep into the engine.
Jumpered both fans together
I have burped it multiple times
changed thermostat
bled air out the steam cross over tubing
*have not changed head gasket due to my knowledge, no one has been that deep into the engine.
