BLUE35THSS

iTrader: (1)

Ok so i have an 02 SS and already put a slp loudmouth exhaust on it and not sure what to do next. Any one have any opinions on next step, certain parts or ...?

5POINT7

Get a lid. TSP, or SLP. Check out thunderracing.com

ActionJack

If it is an A4 get a Torque Convertor.

black00TA

iTrader: (3)

if its a M6 get a shifter, an A4 get a converter, def get an air-lid, do some free mods. get a 160tstat then go from there, suspension parts, good tires etc.

ArticZ

Headers, gears, stall if its a A4, intake lid, or a cam.. all depends on your budget

BLUE35THSS

iTrader: (1)

I Have A M6, Yeh I Definately Will Get A Lid, And Been Looking At Lous Short Stick, Anyone Have It In There Car. Like/dislike?

Deech

iTrader: (8)

I had the LSS (Lous Short Stick) with my Pro 5.0. It was a nice short throw but to notchy for me with the 5.0 stick. Lots of guys have the LSS on the Stock Hurst and love the combo.

SilverBulletSS

my greatest improvement besides the ring and pinion was to do all air intake start with lid to filter to maf air nebula and larger throttle body if you got the cash ls6 intake will help.

wild thing

iTrader: (2)

2002 models come with the ls6 intake

BLUE35THSS

iTrader: (1)

Yeh I thought the o2 ss had the LS6 intake, do i need the MAF or larger throttle body?

02WS6Bird

iTrader: (2)

ill say waht about everyone says since your application does not need a MAF ....LEAVE IT ALONE......ported Throttle Body, Lid+Filter, SUSPENSION (Lower Control Arms, Torque Arm, Sub-frame Connectors, Sway Bars, Strut Tower Brace, Adj. Panhard rod and if your focused on all out handling shocks and SPRINGS)

also from my experience....the increased ariflow into LM exhaust sounds nicer....if you do not plan on headers....get either your stock Y-pipe fabricated or....buy the SLP Y-pipe...slight performance gain but a nicer sound.....itmore throat lil less rasp....ifyou plan on getting LT's get a Dynomax 18" Bullet Muffler or a Borla XR-1 muffler