Blknight6989

iTrader: (2)

I just put on a LM1 catback on my 99 WS6 which probably wasnt the best thing to do because iv caught the bug and want more!!!!!! What should my next mod be im willing to spend up to $500 an want to know how to get the most power out of it.....what do you think????

staringback05

iTrader: (8)

lid, port your tb and ls6 manifold

The PAT WS6

iTrader: (14)

lid, and headers, and ls6 intake.

scotts94_z28

texas speed and performance has pacesetter lt's and tsp ory for $500 right now whish would be the best bang for your buck
http://www.texas-speed.com/shop/item...id=182&catid=8

TOS98SS

iTrader: (2)

+1 for headers

86 IROC

iTrader: (14)

Nitrous

silverTA2002

iTrader: (1)

Lid and throttlebody- definitely- $200

Stall for auto, gears for manual- huge SOTP diffference.

Headers- maybe

Used LS6 intake- good buy

You have plenty of options.

orangeapeel

iTrader: (18)

Headers for sure. Or intake.

Trev_SS

iTrader: (17)

header for sure

Blknight6989

iTrader: (2)

wow thnx guys yea im definetly gonna get a lid cuz i was planning on that anyway......should i jst go with the slp or get the whole flopac?? an i think im gonna start looking at headers....i only live about 10 minutes from speed inc. so i think il go talk to them

1cleanbird

iTrader: (2)

just get the lid. Then Lt's. then stall or gears, depending on the tranny. have fun spending money on your car!! I'm jealous I can't hah.

'Trust'

iTrader: (24)

If you get headers with a loudmouth its going to be unbarably loud, alot of people swap the resonator out for a Dyno-Max Bullet or something similar to tone it down. I say lid, and if you have an auto, then a stall as well. If you have a M6 get a shifter and a lid.

98Z28MASS

iTrader: (6)

If you have an auto get a 3400 stall, if your an m6 then get the pacsetter headers and ory. It will be loud though as I had that old setup and had to switch it out to a magnaflow catback after my cam install so if you dont want an insanely loud exhaust setup then get the ls6 intake manifold and port the stock throttle body.

prince xizor

iTrader: (2)

Try a set of subframe connectors, a new lid with a filter and keep the rest for next years mods.