slowmaro61

iTrader: (2)

do ws6 trans ams have fiberglass hoods?

LS1W66

YES they DO

_JB_

iTrader: (33)

Yes...

RPM WS6

iTrader: (3)

2000badbird

iTrader: (5)

then that would make formula ws6's the lightest birds?

bad6as

iTrader: (17)

so would the hood latch be a lil easer on the hood? when you open it?

i have a z28 and i got a sunoco hood and it seams like when i pull the hood release it pops up hard, and i was thinking maby the ws6 or ss hoods had a diff latch

BLKWS.6

Yes, they are fiberglass. Our cars are all glass/plastic except for the rear fenders.

Ericbigmac83

iTrader: (19)

Yet they still weigh a ton

Shinigami2x4

I have one, it likes to shake a little on highway speeds and vibrates when idling. i like it, and its really, really light.

ghardester

Yep, use a magnet and try to see where it will stick. Rear fenders are steel.

'Trust'

iTrader: (24)

Maybe, a stripper base Formula will probably still come out lighter. 16x8's compared to 17x9's are quite a bit of difference.

Intense

iTrader: (8)

Look at the back of the hood (by the window) see if it hits there... My hood does that but i am getting a new hood so ya.. Just if it is hitting i suggest getting it realigned or the hood will crack cause of the stress on it

BLKWS.6

3540 with 3/4 tank of gas IS NOT! a lot when you step back and look at how big my WS6 is physically.

bad6as

iTrader: (17)

it does not hit any where, i guess you dont understand what im asking

2000badbird

iTrader: (5)

and yet so is a fiberglass hood to a steel one

Gottahavels1

I recently got a ram air hood for my TA. it is fiberglass and weighs a lot less compared to the original hood on my TA. if my fiberglass ws6-style hood weighs less than the stock hood, then what was the stock hood made out of?

blue02formula

iTrader: (1)

Non ram air hood is sheet metal.