noregretz999

iTrader: (6)

searched and didnt find anything

Do I need to remove my dash to take out the outside ac box on the firewall?

I already took of the evaporator and heater core and all that stuff.

any writeups?

thanks

Sunset'01Z

iTrader: (10)

why did u take off your heater core?

6THZ28

iTrader: (11)

you sure you searched? i typed in "a/c removal" and this was the 3rd thread: https://ls1tech.com/forums/showthrea...ht=a+removal+c

noregretz999

iTrader: (6)

i don't see anything in that thread about removing the black plastic cover on the firewall.

I already have all the ac compnents and lines out....I can't figure out the damn cover. It looks like I need to pull it out from inside the car, but their are parts of the dash that are in the way a little. nothing is holding in it I removed all the bolts.

Can someone who has done it before chime in with any tricks so I don't have to take out my dash...

Z28/2002

iTrader: (27)

yes you have to take out the dash to COMPLETELY remove the box

sreve

iTrader: (3)

is this a track only car? garage to trailer to track?

WS6 Rampage

iTrader: (3)

... I would have only removed the A/C compressor.

bww3588

iTrader: (49)

wait, you took the evaporator and the heater core out, but you cant figure out how to get the evaporator/heater core box out........

djsanchez2

iTrader: (14)

Check out the drag tech section. There was a thread about this recently. I might be doing acomplete removal this weekend. It stopped working afew months ago, so why not lose the dead weight?

Here is he best thread i could find, It has alot of good pics.
https://ls1tech.com/forums/showthrea...t=removal+hvac

Z28/2002

iTrader: (27)

I removed the black box on the firewall with a 3lb hammer