MAF ported and screen removed
#1
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: May 2003
Location: Brentwood, TN/ Bowling Green, KY
Posts: 524
Likes: 0
Received 0 Likes
on
0 Posts
MAF ported and screen removed
My friend put a more performance lt4 in his car and he gave me his ported and polished maf ends with the screen removed. I have a 98 t/a and i have heard mixed thoughts about this mod. Can this modification harm my car?
I have an a4 by the way
I have an a4 by the way
#2
TECH Addict
Join Date: Feb 2002
Location: Bailey, Co
Posts: 2,031
Likes: 0
Received 0 Likes
on
0 Posts
Re: MAF ported and screen removed
It can cause you to run lean. If it runs too lean it can cause detonation, in which you'll get knock retard, which pulls timing thus affecting hp.
But... From what I've observed, it seems that '98s are more accepting of this mod. I suppose due to the larger injectors on the '98s. Try them out and see. You can always put your stock ones back on.
But... From what I've observed, it seems that '98s are more accepting of this mod. I suppose due to the larger injectors on the '98s. Try them out and see. You can always put your stock ones back on.
#4
TECH Addict
Join Date: Feb 2002
Location: Bailey, Co
Posts: 2,031
Likes: 0
Received 0 Likes
on
0 Posts
Re: MAF ported and screen removed
I personally think its sort of a "crackling" sound. When you go wide open throttle (WOT), usually in the upper RPM range, and you hear the engine pinging/crackling, that is detonation. Thats the best way I can think to describe what it sounds like.
#7
TECH Apprentice
Join Date: Mar 2003
Location: Brentwood,Tn
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Re: MAF ported and screen removed
Neil I would not do it,it made my car run really rich,and right after i did the mod my 3rd and 4th clutches went out mysteriously,lol. I did put the stocker back on and it runs stout.
Trending Topics
#9
TECH Enthusiast
iTrader: (1)
Join Date: Oct 2002
Location: Hawthorn Woods, IL
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
Re: MAF ported and screen removed
Good advice on not doing this mod. After doing this mod, my trans mysteriously began to slip and eventually failed (the car was stock save for a lid and the MAF de-screening and porting).
#12
7 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,834
Likes: 0
Received 1 Like
on
1 Post
Re: MAF ported and screen removed
i did this on mine, and after the 3rd pass, it started pinging in 2nd gear. Added a MAFT and dialed-in 8% richer on WOT and no more pinging For what it's worth, it made my Formula about .15 quicker in the 1/4 mile.
Derek
Derek