Italiankid77

iTrader: (17)

What are the best internals to build a nitrous motor??It my be a noob qustion but I just wanted to know.

Nimitz87

iTrader: (17)

dude that's a pretty open ended question...provide us with your goals, and your budget, all out track? street? mix? and we can help...but a "best" option is just to vague.

my "best" and your "best" can be completely opposite.

Chad

Italiankid77

iTrader: (17)

Track and street car,I wanna run a high to mid 10.Budget dont matter.

JDP

iTrader: (21)

only want to run high to mid 10s?

with a properly set up car you could do that on a stock bottom end

Nimitz87

iTrader: (17)

build a 347 stock block, 150 plate kit, suspension...should be there mid 10's isn't that hard.

Chad

Italiankid77

iTrader: (17)

Thank you.

Broke EF

What if you want to run well into the single digits in a race only car?

Sean

Nimitz87

iTrader: (17)

do some research...plenty of ways, "well into the single digits" meaning what exactly? set your goals, then a budget.

that is what I'm doing now for an 8 second "street" car.

Chad

z28rob18

iTrader: (7)

if ur gonna build the entire motor and not use the stock short block to run 10s id build it wit forged internals for the spray.

BKHAWK1

I am saling my motor. Its a 347 with pro-mod rods, Diamond pistons and 5.3ltr heads with a stage II port job. It has a LS6 intake with a NX direct port kit plumbed to it. Been 9.80's in a 3400+ pound car. 5K for the long block.

z28rob18

iTrader: (7)

damn theres a deal!