Buying nitrous...Lots of questions
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2008
Location: Texas
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
Buying nitrous...Lots of questions
I am planning on buying a nitrous setup around income tax time. I am going to start with a 75 shot and work my way up to 150 one day. I do have questions though,
1. What setup should I go with?
2. Is my car going to have to be retuned, and if so, will it run right off the bottle?
3. Will I need to change anything like trans, rear-end, etc.?
4. Is it going to tear my car up?
5. I know I want a remote bottle opener, and bottle heater, and a purge, but is there anything else I need?
Any advice would help guys. Thanks.
1. What setup should I go with?
2. Is my car going to have to be retuned, and if so, will it run right off the bottle?
3. Will I need to change anything like trans, rear-end, etc.?
4. Is it going to tear my car up?
5. I know I want a remote bottle opener, and bottle heater, and a purge, but is there anything else I need?
Any advice would help guys. Thanks.
#3
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2008
Location: Texas
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
Well i have the average bolt-ons and am going to have it dyno tuned before I buy nitrous. I just don't know practically anything about nitrous setups or jetting or tuning or anything. I am new at n20.
#4
12 Second Club
iTrader: (5)
1. What setup should I go with?
2. Is my car going to have to be retuned, and if so, will it run right off the bottle?
3. Will I need to change anything like trans, rear-end, etc.?
4. Is it going to tear my car up?
5. I know I want a remote bottle opener, and bottle heater, and a purge, but is there anything else I need?
Any advice would help guys. Thanks.
2. Is my car going to have to be retuned, and if so, will it run right off the bottle?
3. Will I need to change anything like trans, rear-end, etc.?
4. Is it going to tear my car up?
5. I know I want a remote bottle opener, and bottle heater, and a purge, but is there anything else I need?
Any advice would help guys. Thanks.
2. Check the A/F on the dyno and go from there
3. Don't know with an A4 trans, I had a M6.
4. It won't if you do everything correctly.
5. You want a window switch, and a FPSS.
#6
FormerVendor
iTrader: (6)
Join Date: Nov 2007
Location: Glenolden, PA
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/nitrous-o...s-related.html
Read through this sticky and you will really do yourself a favor. Most of you questions will likely be answered in there including the window switch and FPSS.
We have a lot of innovative products you may be interested in. Check out our site and maybe pick a few kits you may be interested it. Shoot me a pm and we can go from there. I am available all the time and will help you on any questions you still have
Read through this sticky and you will really do yourself a favor. Most of you questions will likely be answered in there including the window switch and FPSS.
We have a lot of innovative products you may be interested in. Check out our site and maybe pick a few kits you may be interested it. Shoot me a pm and we can go from there. I am available all the time and will help you on any questions you still have
#7
LS1TECH Sponsor
iTrader: (13)
Join Date: Jul 2004
Location: Massachusetts
Posts: 1,766
Likes: 0
Received 0 Likes
on
0 Posts
I would also look at adding a bottle heater - That would run an additional $89
Give us a ring or drop us an email we would be glad to help!
Dean
Trending Topics
#9
FormerVendor
iTrader: (25)
Like suggested above talking directly with someone that can give you precise answers to your questions would be very benificial for you. It will save you time from reading and the confusion you get from different contradicting answers from different people. Feel free to give us a call for some knowledgable direction. We have a toll free number 1-866-648-7637. Talk to one of our techs for some one on one conversation.
Dave
Dave