1999TransamWs6

iTrader: (21)

What is everyone using for a nitrous controller as far as bringing in a second stage. I would like something that is time based and something that can ramp it up as I go. Anything like this out there?

What are you guys using? Dont need the safety stuff just need a controller for my second stage.

Robin L

I have a NOS Mini 2 Stage that I use in my Camaro and on the dyno.

I have a NOS Launcher Controller with the Wide Band Option that I use in my 7 sec Nova. It also has the SD card for logging the wide band ,rpm and nitrous percentage during a run.

Robin

Ray@Nitrous Outlet

I agree that the NOS mini (pn)15974NOS is a very nice unit....it will controll 2 stages has a built in window switch, delay, and TPS activation. I used this one on my 94 for the last few seasons, and will be upgrading to the launcher ASAP.

http://www.nitrousoutlet.com/catalog...roduct_id=1539

1999TransamWs6

iTrader: (21)

This looks like a good unit. Robin do you have a part # on the NOS Launch Controller?

Thanks

Joe

Ray@Nitrous Outlet

Launcher (PC Controlled)
http://www.nitrousoutlet.com/catalog...roduct_id=2972

Launcher (LCD Touch screen)
http://www.nitrousoutlet.com/catalog...roduct_id=2966

Launcher (Hand held controller)
http://www.nitrousoutlet.com/catalog...roduct_id=2971

Robin L

Yeah...what he said

Robin

1999TransamWs6

iTrader: (21)

Thanks a lot guys!

Do they all do the same things? Just a difference whether it is PC, LCD Screen or Handheld?

vetteboyc5

iTrader: (9)

Im using the fjo, So far so good. It was pretty easy to hook up, I do like the easy to use laptop interface once i got the hang of the setup and everything it was a breeze. It has 2 stage activation, additonal imput(trans brake, clutch switch if needed) Tps wot switch, window switch. Rpm or time based progressive control.

Im using it as a window switch, and wot switch right now since im only running a 100 shot. I just have it set for 100% from 3000-6200

I dont have a laptop so I had to program it with my home pc, I Just made a quick disconnect setup, and used a battery to power the 2 terminals at my pc, it takes 2 seconds to upload the setup for it