SLP bellows fix
02-01-2009, 01:59 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (5)
Join Date: Jun 2006
Location: Long Beach MS/Birmingham AL
Posts: 641
Received 0 Likes
on
0 Posts
SLP bellows fix I'm going to swap from a nozzle to a plate setup (either nitrous outlet or hsw; i likey the perimeter fire idea), and I had put my nozzle in the bellows 
. Is there a material to plug the hole that will be reliable, or should just do the home depot mod
? Also thinking about doing the Nitrous outlet MAF plate as it seems to be really convienient and good lookin
. I've got the NX solenoids, so the jets should still be accurate for a 150 correct??
. Is there a material to plug the hole that will be reliable, or should just do the home depot mod? Also thinking about doing the Nitrous outlet MAF plate as it seems to be really convienient and good lookin. I've got the NX solenoids, so the jets should still be accurate for a 150 correct?? 
02-02-2009, 09:14 AM
#2
FormerVendor
iTrader: (4)
Join Date: Jul 2005
Location: Glenolden, PA
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
I would suggest just picking up a new bellow. You technically could just grab a 1/8"NPT or 1/16"NPT plug and thread it into the existing nozzle retaining nut, but I personally would feel a lot better just swapping bellows.
Nick
Nick
