need a few ideas
02-24-2009, 01:42 AM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
need a few ideas have a 2001 ls1 with new forged probe 11.5:1 comp. pistons and i beam rods with a set of probes ring set. bbk ssi intake with a bbk tb, slp lid, full exhaust i havent purchased my heads yet but i m buying dart pro ls1 heads. I just bought this nitrous kit off a local but i dont know nothing anout nitrous never used or been around it to much i wanna spray as much as a i can get out of it safly without doing any damage whatcha u think i can spray
02-25-2009, 10:28 AM
#3
FormerVendor
iTrader: (4)
Join Date: Jul 2005
Location: Glenolden, PA
Posts: 1,954
Likes: 0
Received 0 Likes
on
0 Posts
Well I would recommend calling the engine builder or probe and see what they rate their pistons to. Most off the shelf pistons carry a rating of 250.
Take a look at the all-out kit we offer for the ultimate safety package. I would also recommend reading as much info as you can concerning nitrous and its use. Many times most accidents can be avoided if you take the appropriate steps in prevention. If you need any help or have any questions about the kit, please feel free to give us a call. Thanks.
nick
Take a look at the all-out kit we offer for the ultimate safety package. I would also recommend reading as much info as you can concerning nitrous and its use. Many times most accidents can be avoided if you take the appropriate steps in prevention. If you need any help or have any questions about the kit, please feel free to give us a call. Thanks.
nick