1/4 Times with 100 Shot
#1
8 Second Club
Thread Starter
iTrader: (11)
Join Date: Feb 2002
Location: (760) Phelan Ca.
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
1/4 Times with 100 Shot
I went out to Pheonix this weekend for the PSCA Finals and I took my car out there for some Test and Tune between rounds.
Sat.
1st Run
1.552 60ft
4.376 330ft
6.735 1/8et
104.593 1/8 mph
10.502 1/4et
130.282 1/4mph
2nd Run
1.541 60ft
4.364 330ft
6.728 1/8et
104.283 1/8mph
10.500 1/4et
130.298 1/4mph
3rd Run
1.568 60ft
4.372 330ft
6.730 1/8et
104.639 1/8mph
10.495 1/4et
130.529 1/4mph
The first runs were done with no NOS off of the line because I wasn't sure what to expect.So I decided to pull out 2 plugs which they both seem to be a bit lean.That jetting was .52 NOS .32 Fuel so I put in a .35 fuel and finally started leaving on the NOS.
4th Run
1.430 60ft
4.225 330ft
6.581 1/8et
104.601 1/8mph
10.352 1/4et
130.282 1/4mph
5th Run
1.466 60ft
4.256 330ft
6.614 1/8et
104.502 1/8mph
10.384 1/4et
130.263 1/4mph
6th Run
1.537 60ft
4.361 330ft
6.723 1/8et
104.452 1/8mph
10.491 1/4et
130.382 1/4mph
7th Run the bottle was getting low
1.524 60ft
4.369 330ft
6.744 1/8et
103.863 1/8mph
10.532 1/4et
129.654 1/4mph
8th Run nearly empty bottle
1.517 60ft
4.367 330ft
6.779 1/8et
101.866 1/8mph
10.648 1/4et
127.070 1/4mph
Sun
1st Run fresh bottle New Best
1.461 60ft
4.238 330ft
6.582 1/8et
105.221 1/8mph
10.327 1/4et
131.174 1/4mph
2nd Run
1.489 60ft
4.277 330ft
6.624 1/8et
104.956 1/8mph
10.383 1/4et
130.536 1/4mph
3rd Run
1.576 60ft
4.377 330ft
6.722 1/8et
105.275 1/8mph
10.466 1/4et
131.116 1/4mph
4th Run
1.502 60ft
4.317 330ft
6.676 1/8et
104.514 1/8mph
10.446 1/4et
130.209 1/4mph
5th Run
1.626 60ft
4.452 330ft
6.816 1/8et
104.399 1/8mph
10.592 1/4et
130.100 1/4mph
6th Run I guess the bottle must have been near empty
1.512 60ft
4.375 330ft
6.803 1/8et
101.346 1/8mph
10.698 1/4et
126.219 1/4mph
The rest on the motor
7th Run
1.655 60ft
4.720 330ft
7.270 1/8et
96.434 1/8mph
11.336 1/4et
121.413 1/4mph
8th Run
1.726 60ft
4.772 330ft
7.300 1/8et
97.323 1/8mph
11.336 1/4 et
122.313 1/4mph
9th Run
no slip the tower said that they didn't have it but told me that I ran a 11.35 at 122
All runs were made on complete stock fuel system,stock Rear End with 4.10's and Eaton Posi on 28x10.5 ET Drags,and stock short block.
Race weight is 3160#'s with me in it.
Sat.
1st Run
1.552 60ft
4.376 330ft
6.735 1/8et
104.593 1/8 mph
10.502 1/4et
130.282 1/4mph
2nd Run
1.541 60ft
4.364 330ft
6.728 1/8et
104.283 1/8mph
10.500 1/4et
130.298 1/4mph
3rd Run
1.568 60ft
4.372 330ft
6.730 1/8et
104.639 1/8mph
10.495 1/4et
130.529 1/4mph
The first runs were done with no NOS off of the line because I wasn't sure what to expect.So I decided to pull out 2 plugs which they both seem to be a bit lean.That jetting was .52 NOS .32 Fuel so I put in a .35 fuel and finally started leaving on the NOS.
4th Run
1.430 60ft
4.225 330ft
6.581 1/8et
104.601 1/8mph
10.352 1/4et
130.282 1/4mph
5th Run
1.466 60ft
4.256 330ft
6.614 1/8et
104.502 1/8mph
10.384 1/4et
130.263 1/4mph
6th Run
1.537 60ft
4.361 330ft
6.723 1/8et
104.452 1/8mph
10.491 1/4et
130.382 1/4mph
7th Run the bottle was getting low
1.524 60ft
4.369 330ft
6.744 1/8et
103.863 1/8mph
10.532 1/4et
129.654 1/4mph
8th Run nearly empty bottle
1.517 60ft
4.367 330ft
6.779 1/8et
101.866 1/8mph
10.648 1/4et
127.070 1/4mph
Sun
1st Run fresh bottle New Best
1.461 60ft
4.238 330ft
6.582 1/8et
105.221 1/8mph
10.327 1/4et
131.174 1/4mph
2nd Run
1.489 60ft
4.277 330ft
6.624 1/8et
104.956 1/8mph
10.383 1/4et
130.536 1/4mph
3rd Run
1.576 60ft
4.377 330ft
6.722 1/8et
105.275 1/8mph
10.466 1/4et
131.116 1/4mph
4th Run
1.502 60ft
4.317 330ft
6.676 1/8et
104.514 1/8mph
10.446 1/4et
130.209 1/4mph
5th Run
1.626 60ft
4.452 330ft
6.816 1/8et
104.399 1/8mph
10.592 1/4et
130.100 1/4mph
6th Run I guess the bottle must have been near empty
1.512 60ft
4.375 330ft
6.803 1/8et
101.346 1/8mph
10.698 1/4et
126.219 1/4mph
The rest on the motor
7th Run
1.655 60ft
4.720 330ft
7.270 1/8et
96.434 1/8mph
11.336 1/4et
121.413 1/4mph
8th Run
1.726 60ft
4.772 330ft
7.300 1/8et
97.323 1/8mph
11.336 1/4 et
122.313 1/4mph
9th Run
no slip the tower said that they didn't have it but told me that I ran a 11.35 at 122
All runs were made on complete stock fuel system,stock Rear End with 4.10's and Eaton Posi on 28x10.5 ET Drags,and stock short block.
Race weight is 3160#'s with me in it.
#2
12 Second Club
iTrader: (6)
Join Date: Sep 2003
Location: Burbank, CA
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
Nice runs Nine Finger!!! 10's must feel really good, looks like you got that car dialed in pretty good. And all runs on the stock rear?!?!?!?! that must be some kind of a record, LOL.
#5
8 Second Club
Thread Starter
iTrader: (11)
Join Date: Feb 2002
Location: (760) Phelan Ca.
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Deividas93GT
How did that rear end hold up? What kinds of heads/cam are you running?
#7
8 Second Club
Thread Starter
iTrader: (11)
Join Date: Feb 2002
Location: (760) Phelan Ca.
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1bad346Z28
What kinda fuel pump, converter, rear gears are you running?
Trending Topics
#11
Teching In
Join Date: Nov 2003
Location: Cincinnati, OH
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nine Finger 02 Z28
Stock fuel pump,a custom converter 3500 stal,and 4.10's on 28x10.5 15 ET Drags.
#12
TECH Fanatic
Join Date: Jul 2002
Location: San Antonio Texas
Posts: 1,206
Likes: 0
Received 0 Likes
on
0 Posts
Whats the A3?
I assume its either a typo in your sig or you have a different tranny?
Interested to hear about suspension mods as well.
By the way, "WOOOOOOOOOOOOOOOOOOOOOOOWWWWWWWWWWW!!!"
Congrats.
I assume its either a typo in your sig or you have a different tranny?
Interested to hear about suspension mods as well.
By the way, "WOOOOOOOOOOOOOOOOOOOOOOOWWWWWWWWWWW!!!"
Congrats.
#13
8 Second Club
Thread Starter
iTrader: (11)
Join Date: Feb 2002
Location: (760) Phelan Ca.
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1bad346Z28
That's amazing..are you using a wet kit or dry?
#14
8 Second Club
Thread Starter
iTrader: (11)
Join Date: Feb 2002
Location: (760) Phelan Ca.
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2002_TAWS6
Whats the A3?
I assume its either a typo in your sig or you have a different tranny?
Interested to hear about suspension mods as well.
By the way, "WOOOOOOOOOOOOOOOOOOOOOOOWWWWWWWWWWW!!!"
Congrats.
I assume its either a typo in your sig or you have a different tranny?
Interested to hear about suspension mods as well.
By the way, "WOOOOOOOOOOOOOOOOOOOOOOOWWWWWWWWWWW!!!"
Congrats.
Suspenion mods consist of Hal shocks all of the way around with the front springs,Chrome Moly K Member and A Arms,and a Spohn Torque Arm.
Thanks