My nitrous install pics (1st time)
#1
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Oct 2005
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
My nitrous install pics (1st time)
This is my first time installing nitrous. It's the TNT Power ring kit. I forgot to add pics of the switches (in the ash tray). Let me know what you think.
The WS will be set to 6000, not 5800.
The WS will be set to 6000, not 5800.
Trending Topics
#20
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Oct 2005
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
It made 592rwhp and 605ft/lbs on a 150 with a RICH tune. It was low 10's across the board. I'm sure I could squeeze 600 out of it. Have plenty of fuel though, so I hope to bump it up to 200 after a little while.
BTW: First time I sprayed, it pulled HARD. BUT the damn nitrous solenoid STUCK OPEN! I stopped and turned off the bottle. I almost had a heart attack. Pull the coilpack harness and let it turn over for a little while. Luckily it started right up with no issues. I'm ordering new noids this week. Then I'll give it a go again!
BTW: First time I sprayed, it pulled HARD. BUT the damn nitrous solenoid STUCK OPEN! I stopped and turned off the bottle. I almost had a heart attack. Pull the coilpack harness and let it turn over for a little while. Luckily it started right up with no issues. I'm ordering new noids this week. Then I'll give it a go again!