Noxious

About to make the first track visit with the sauce and I need to know what to get for a blow down

Pretty sure bottle looks like this

http://www.jegs.com/InstallationInst.../741-16152.pdf

Searched until I couldn't search anymore without any real answers.....

RsSean

iTrader: (27)

Well that is the burst disc, I think all the bottle come with the burst disc already in them when you get the bottles. The blow down tube is a actuall tube that will screw over the top of the burst disc that if the bottle was to get to hot, the nitrous would be routed outside the car and not in the cabin.

http://www.harrisspeedworks.com/prod...&cat=24&page=1

Something like this is the blow down tube.

Noxious

Yeah that's the best picture I could find of it.......



All the NOS brand blow downs I saw didn't have the screw in adapter and were female so they obviously wouldn't work. That's why I was getting annoyed.

I actually looked at that part from HSW and read where it can't be used with some NOS bottles......What is some?

Do you know the thread type/size of NOS bottles? I'll run to the hardware store and fab up something probably because I need it by this weekend.

Oso SS

iTrader: (3)

heater hose, hose clamp, done.

cgperformance1320

iTrader: (1)

u need this
http://www.jegs.com/i/Edelbrock/350/72961/10002/-1

and this
http://www.jegs.com/i/JEGS/555/16530/10002/-1

i have a nos blow down adapter if u want it just pm me ur info and ill send it to ya then ull just need the tube

MYSS02

This guy is 1000% right... installed on my ride/nos, my tuner would not tune it w/o either!

danieloneil01

Hate to do this but it's cheaper here by alot and they're a sponsor. And if you live close to Texas you will get it the next day.


Blow off valve
http://nitrousoutlet.com/catalog/pro...9&product=2550

Blow down tube, take your pic of the 2

http://nitrousoutlet.com/catalog/pro...8&product=2516

http://nitrousoutlet.com/catalog/pro...6&product=2517

Nick@HSW

iTrader: (4)

Yes ours will work with that bottle. If you need it bent in a 90* vs. a 180* bend just put it in the customer notes and I can bend it however you like.

Nick

cgperformance1320

iTrader: (1)

your right that was just for a refrence buy a sponsor they keep this going !!!!

Nitro Dave's Nitrous Outlet

iTrader: (25)

There ya go... This is what he needs. The 90 works for the NOS style bottles that have the fitting in the neck..

Good call on the fitting.. Alot of people get more confuused by using the correct fitting..

Thanks for suggesting us..
Dave