Dumbest nitrous install ever!!! I spilled on myself after reading this
#1
TECH Junkie
Thread Starter
Join Date: Jan 2002
Location: At the office
Posts: 3,015
Likes: 0
Received 0 Likes
on
0 Posts
Dumbest nitrous install ever!!! I spilled on myself after reading this
#2
That is pretty funny! I think that is the worst I have ever seen. Up until this the craziest thing I ever saw on a nitrous install was a guy in a truck with a NOS Cheater system jetted to 250hp and he engaged the system by twisting two wires together that were stripped back about 3 inches. One wire was 12v and the other went straight to the solenoids. I later saw the same truck at the track--full size short bed(late 70's) 406, Bowtie heads, Victor jr, Holley 750, headers, 28X10 slicks, 4.56's, and a race wieght of 3600 pounds=14.10 on a 250 shot!
Last edited by Steve@SpeedTech; 01-14-2004 at 04:18 PM. Reason: typos
#3
10 Second Club
hahahahahahahahahahahahahaahahahahahaha. that is funny. acually he is creating crank case pressure instead of cylinder pressure. ahahahahahahahahaahahahahahahahaahahahahas!!!
#5
TECH Addict
iTrader: (1)
Join Date: Jan 2002
Location: Phoenix, AZ
Posts: 2,234
Likes: 0
Received 0 Likes
on
0 Posts
I liked this guy's comment:
"Better re do that and only circle the actual intake itself. He may be the first to run a single fogger direct port system!"
single fogger direct port system in theory i guess that is what he is doing LOL
"Better re do that and only circle the actual intake itself. He may be the first to run a single fogger direct port system!"
single fogger direct port system in theory i guess that is what he is doing LOL
Last edited by Ryan23silverado; 01-14-2004 at 05:11 PM.
Trending Topics
#11
idiots
There was a dumbass here in town named Matt that had his TNT kit rigged with the WOT swith being a keychain wired to the TB. He also had a "family secret" cam.............