robsquikz28

iTrader: (246)

Does anyone run a stand alone in the battery location That is fitted for the battery location. But still runs the battery in the front engine bay?
Im just wondering if people are running a light weight battery up front and using a stand alone in the battery tray location?

Any pics if so?

Slickwill

I will be relocating my battery to the back. But I also am planning to try and run my stand alone in the stock battery location and would love to see pics and how people did it

ls1curt

iTrader: (31)

heres mine

robsquikz28

iTrader: (246)

But does anyone run a battery and a stand alone in the same location?

Or move the battery to the driver side.

Slickwill

They sell ones that fit I'm the fuse area on driver side... I personally think it's cleaner to relocate battery to back just my thoughts

Detoxx03

iTrader: (14)

Relocated my battery to the rear

ls1curt

iTrader: (31)

with my setup i dont think you would have a problem putting a small race battery next to the standalone or just mount the standalone where the fuses are and leave the battery alone

BarneyMobile

iTrader: (4)

Why not just get the kit that mounts it near the fuse block. I run the N2O Outlet plastic cell that mounts by the fuse block without issue.

Oldass

Check out stand alone systems on the Nitrous Outlet web site. They have one for the battery tray, and for the driver side.

Graham@NitrousOutlet

Here is the fuse area dedicated they are talking about.


Now I have not tried, but I think you could get some of the smaller gel cell batteries or braille type batteries next too the dedicated if you build a bracket for it. I would probably just use the fuse area tho.