Dyno'd the new set up
#1
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Springfield, MO
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Dyno'd the new set up
Motor blew up a couple weeks ago so I went ahead and forged it and got a little bigger cam. All the tracks are closed so the dyno numbers are gonna have to hold me over til Spring.
552/523 on a 150
417/380 on motor
The guys told me when they dynoed it that it should pick up some more power once the motor is broke in. I really was pushing for about 440 on motor so let's hope so.
Fast 90/90
Plate kit
Pat G cam
4.11's
Circle D 4C
Hoping for some 9.8's this spring!
552/523 on a 150
417/380 on motor
The guys told me when they dynoed it that it should pick up some more power once the motor is broke in. I really was pushing for about 440 on motor so let's hope so.
Fast 90/90
Plate kit
Pat G cam
4.11's
Circle D 4C
Hoping for some 9.8's this spring!
#7
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Springfield, MO
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
It did have cut 1LE springs now it has the stock ones without the isolators or bump stops. Got Strange coil overs in the front... it looked dead sexy with the rears just barely tucked but not exactly effective for what i am doing with the car so I put the stock height (almost) on the back but with a 28" tire it doesn't look too bad
Trending Topics
#13
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Springfield, MO
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
^ don't be going off breaking my heart!
I am looking for a stand alone and gonna jet it for a 225 probably. I will be able to make one pass before they kick me off the track lol.
But like I said #'s only go so far. I have a killer set up and its all made to work very well together. Dyno was mostly just a tool for tuning. I have almost all the suspension that I could desire
I am looking for a stand alone and gonna jet it for a 225 probably. I will be able to make one pass before they kick me off the track lol.
But like I said #'s only go so far. I have a killer set up and its all made to work very well together. Dyno was mostly just a tool for tuning. I have almost all the suspension that I could desire
#16
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Dec 2008
Location: Springfield, MO
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
It has a performabuilt in it now that was in my firehawk
I built the old trans but didn't want to be burning up clutches so I swapped
And as far as pics there are a few on my page but the thing has 216k so it definitely cannot compare to a lot of the cars on this site. It really doesn't have a good angle unless you are 50 feet away